how to open a pipe tobacco tin
The process of opening a pipe tobacco tin is similar to that of other types of tins: you'll need to remove the lid, then use your knife or scissors to cut around the metal tab, which will expose the contents.
You should take care when opening a tin of pipe tobacco. The chemicals inside can be harmful, so be sure to wash your hands thoroughly after touching them and avoid breathing in any fumes from the can.
It may be necessary to heat up the tin before cutting it open, but if this isn't possible, you can use a hair dryer or other warm object.
Pipe tobacco tins are typically made of tinplate and have a cover to keep the tobacco fresh. These covers are usually held in place by a rubber band. This is how you open your tin:
1. Remove the rubber band from around the tin's lid.
2. Slide off lid, revealing an inner piece, which is attached to a metal plate with screws on each side.
3. Use a Phillips screwdriver to remove these screws, then lift up on the metal plate and remove it from inside the tin.
4. Remove remaining pieces of tin by lifting them up and out of your pipe tobacco tin while they are still attached together at one end by metal clips or pieces of wire that hold them into place inside your pipe tobacco tin container (if there are any). more
评论
发表评论